Psa Gen 4 8 Inch 9mm Sba Pistol Review

My goal is to review every pistol caliber carbine on the marketplace so naturally, I had to get ahold of the Palmetto State Armory AR-9, also known as the PA9.

The model I'k reviewing is going to be the Glock design magazine version. They besides brand this same gun with AKV pattern mag, AKA, the CZ Scorpion magazine.

Previously I purchased and reviewed the PSA AKV, which is a 9MM AK that Palmetto has put out that has been very pop.

The AKV is a gun that I like an exceptional amount. I also recently took a look at another AR9, which would exist the EPC9 from Aero Precision. At present I'll swoop into the PSA AR9 review!

PSA AR9

· Quotient: 9mm
· Various Lengths and Configs
· CZ Magazine and Glock Mag

Most Palmetto State Armory

Palmetto Country Armory is mostly known for value-built firearms. They aren't known for loftier end high quality, merely they are known to make a adept blindside for your buck.

The value is definitely there in pretty much every one of their guns that I have purchased or owned and their lowers for their AR-15s seem to work just as well every bit whatever other forged lower on the market place.

So today we're taking a good hard look at another pistol quotient carbine, AKA, a PCC from Palmetto State Armory.

Overview of the PSA AR9

When you lot first grab this gun, information technology'southward definitely interesting in that it'due south bulky for a pistol-caliber carbine. It has a flat side, whereas an AR typically has a rounded upper and the cake type build of this gun definitely gives it a very unique look.

The upper meets the hand guard in a way that isn't totally flush just still transitions relatively easily.

The lower is solid and has thick walls on the magwell. This model comes with an SB tactical brace.

The break is a standard A2 break. The charging handle is your average run-of-the-manufacturing plant AR-15 charging handle.

Overall, when you grab this gun, it feels solid. There's a decent amount of weight to it, and it feels well congenital straight out of the box.

Ergonomics

The ergonomics of any gun are the base of where it starts. It depends on how well the guns feel in your hand and how well the controls piece of work if it volition feel right while shooting it.

So, we will offset with the controls get-go with the safety.

Safety

The condom on the PSA AR9 is your standard mil-spec AR-style rubber lever.

It is only on the left side of the gun geared towards correct-handed shooters.

Information technology is slick on the right side of the gun only is nonetheless marketing with fire and condom on the lower.

The safety can very easily exist swapped for any standard AR-15 selector switch.

That is a actually practiced sign and I like that already because there are a million and a one-half selector switches.

So right off the bat, the PSA PA9 allows you to actually pick any your favorite selector is for AR on the marketplace today.

Pistol grip

This detail AR9 comes with a Magpul way, pistol grip.

Similar most budget AR'south it comes with the Magpul MOE. This grip is Magpul'south standard offering and not the plus model that is more rubberized.

I prefer the Magpul grips to nearly whatsoever grip on the marketplace. So to me, this is corking.

This feels keen. This feels like my standard AR-15 that I would pull out of my condom, which makes it overnice and familiar.

Let'southward motility effectually to the magazine release.

Magazine Release

The mag release on PCCs tend to be a little unlike considering of the way that the magazines have to sit down in the magazine well and be retained, whether that exist a Glock mag or an AKV mag, they have to release differently than a standard AR mag because they don't have the same in-gun magazine retentivity methods.

And then you lot'll see on this gun, besides equally, the EPC-9, there is a lever style mag release.

That is so information technology can release the Glock mags like a Glock magazine was intended to release.

Now the PSA AR-9 has a actually nice, large paddle design, and the whole lever itself operates on an almost seesaw-like movement.

So when you printing information technology, you tin meet information technology lift, and and then the magazine shoots out. The magazine release functions extremely well,a nd the oversized button is overnice from the factory.

If you wanted to supersede this with an aftermarket i, you may be hard-pressed. I don't know. I haven't looked at them much, but overall, not a bad design.

I personally wouldn't change the magazine release lever. I have no issues with information technology as information technology is and it'southward fabricated from aluminum, so it should concluding.

The overall feel of it is great and I have relatively smaller hands and, I can reach up with my index finger and release the magazine most as easy on this gun as I can any gun I own.

And then while we're talking about magazines, let'south talk virtually the magazine well.

Mag Well

The magazine well on pistol caliber carbines can really be hitting or miss. The EPC-9 did okay.

This ane, once over again, is just okay. Information technology has a decent flare to the mag well.

The magazine well itself has very thick walls, and when yous shove a magazine in the gun, it does funnel upwardly and into the gun, simply because these are Glock magazines and these weren't necessarily created for this and to go this far into a metal magazine well, it does take some elevate.

I would note that magazines do release relatively hands so magazine release seems to work pretty skillful.

Haven't done a lot of quick-firing drills to where I change mags apace with the PCC, but overall, the flare seems to be enough, but it'due south not something on the level of a Noveske N4's flare or any other loftier end lower that has a lot of magazine flare.

Let's talk nigh the bolt hold open and bolt release.

PSA AR9

· Caliber: 9mm
· Diverse Lengths and Configs
· CZ Magazine and Glock Magazine

Bolt Hold Open up and Commodities Release

This is very much your standard, AR-15 bolt release or bolt concord open. It performs the same function.

It'south definitely pinned. It's not a screw-like you would hope in some models.

So if you lot were going to change this, it may exist a little difficult to get the pin out.

Over again, this also looks to be another standard, AR-15 fashion function.

There'southward nothing extremely special about information technology. If you were pop open the upper, you can look at it and it'southward very much the verbal same bolt release as an AR.

Charging Handle

The charging handle on the AR-nine is your standard AR-15 charging handle, which means you lot can utilise any charging handle yous wish.

This comes with what would appear to be a standard mil-spec charge handle. I'g a big fan of the Radians Raptor charging handles and of the Geisseles.

Then those could easily be interchanged and put on this PSA AR-ix and could very, very easily exist swapped out.

So having your favorite charging handle is definitely possible on the PSA PA9. Otherwise, your standard charging handle works similar you lot would expect information technology to be very smooth, with no problems. Throw a piffling oil on it and it slides like glass.

Let's talk nearly caryatid and stock options.

Brace and Stock Options

The model PSA AR9 is a pistol configuration, it comes with an SB Tactical, SBA4.

If yous wanted to add a stock yous could hands Form one this gun and catechumen it to an SBR and put a stock on it.

Otherwise, these braces are fantastic. Y'all can easily put on any AR-style caryatid.

I don't know if this tube is mil-spec or commercial, merely I'd be willing to bet coin that it is mil-spec.

And then you can utilise any mil-spec stock every bit long as yous Form 1 information technology.

You can buy an AR9 with a xvi inch barrel. So if you wanted to, you could change out uppers, throw a stock on it, have a xvi inch gun, and yous're skilful to become.

Iron Sights

This gun comes equally a flat top gun. If you desire to run irons on it, the world is your oyster so to speak.

Yous could put MBUS Pros, regular MBUS's, or any iron sights you wish.

Personally, with a PCC, I'yard just going to run a red dot sight, whether that's on a mount or just run it flush. I'thou going to run a red dot.

I'm not going to run irons and that's merely my personal preference. I don't run across a point in running irons on a PCC.

A PCC isn't something that I likely would grab commencement if things were to get to the signal where I needed a burglarize platform.

PSA AR9

· Caliber: 9mm
· Diverse Lengths and Configs
· CZ Magazine and Glock Magazine

Trigger

The pull and break of the stock trigger worked great. Crisp, clean takeup with little upshot in the style of firing.

I did not bother to modify out the trigger as this was a T&E gun provided by PSA.

My buddy purchased one of PSA's Blem AR-9'due south and he had zip issues with his trigger reset. So this is probable a one-off upshot.

Optics Mounting

Optic mounting is very piece of cake on this gun. It is your standard 1913 Picatinny rail.

Right now, I accept AT3 Tactical RD-50 red dot sight on top of it.

It ran actually well, really liked it, easy to acquire my targets, but literally, any optic you would desire would run great on this gun.

Accessories Mounting

If you want to run a flashlight or whatever other accessory, this gun is an K-LOK railed gun.

You could besides run annihilation on the 1913 track, whether that be a record switch holder, like the Cloud Defensive LCS, or if you want to run something that locks into Thousand-LOK, this gun will hold it.

There are two side-by-side M-LOK slots at the three o'clock, 6 o'clock, and 9 o'clock positions. When it comes to G-LOK slots you actually have your option there.

There are also 2 QD mounting holes at the rear of the handguard for a QD sling zipper.

Shooting

When I shot the PSA AR-9, this is the eight-inch butt model, this thing was an accented dream to shoot.

Information technology was apartment shooting equally information technology gets.

I shot information technology suppressed.

I shot it unsuppressed.

Both were perfectly fine. The one thing I will say that really impressed me is how nice little recoil this gun had and overall how fun this gun was to shoot.

The trigger issue aside, this was absolutely a phenomenally shooting gun.

It was accurate, on target, and Transitions were easy and smoothen.

There was very lilliputian muzzle rise, fifty-fifty with the bones A2 muzzle device, and shooting it suppressed was fifty-fifty less.

Shot the Microtech R2K9 suppressor on it. Worked phenomenally in both configurations. Was very quiet.

Had no issues with ejections. No bug cycling.

Overall, but a really solid gun. The bolt functions exceptionally well, a actually solid bolt configuration for the AR9.

Had to obviously break it apart to mountain the suppressor and take off the A2 break.

All the internals were very skillful, very clean, and what you would expect in your PCC.

Overall shooting this gun was absolutely phenomenal. The handguard is pretty overnice and slim.

You can C clench grip very easily on this rail because information technology'south then slim. But the nice thing is it'south off the barrel enough to where yous probable won't have heat issues called-for your hand while shooting in rapid succession.

Overall, if you wanted to mount a flashlight or tape switches the rail, it might get a niggling crowded since this is probably a six and a half or seven-inch rail.

But when it comes to shooting and gripping the gun with your support hand, information technology is absolutely a phenomenal gun to shoot.

And allow's talk almost aesthetics.

PSA AR9

· Caliber: 9mm
· Various Lengths and Configs
· CZ Magazine and Glock Magazine

Aesthetics

Looking at the PSA AR-9, right out of the box, the upper has a near flat side.

It'south very interesting, you don't see this design much. It nigh reminds me of an FAL, very unique milling, merely I think they do that on purpose.

I call up PSA wanted to set itself apart from the competition, and that makes sense considering there's a ton of AR-9s out there, including Aero Precision EPC-nine, which we volition compare this gun to later.

I do have a couple of critiques, where the handguard meets the upper, information technology's not flush.

At that place'south a slight ledge and I think with merely a piffling bit more than machining you could have a far amend fit and finish.

The only exception I would make is if that upper thickness was required for durability and structural integrity, I but feel like they could accept slimmed that downward to friction match the handguard and it would have transitioned really, actually well.

At first, I didn't call back I would like the flat-sided upper design that they accept, just every bit before long as I pulled it out and I held it, and actually had it in my hand, I actually started to like the artful of the flat side.

It definitely has a shelf blazon of lower, like their AR-ten model lower, but there are but a couple of things about this that I would change aesthetically.

I would only want the "lines" to lucifer up a piffling better.

Granted for the price point, it's really hard to complain well-nigh any of this, but to be completely fair and to give it, a full, complete review, I felt like that needed to be mentioned.

Obviously, you lot can run across in the photos that it would only exist dainty if these lines came together just a little bit better, but overall functionality-wise, the aesthetics have no impact on office, and information technology however looks like a hell of a gun.

It'south information technology notwithstanding looks great. Plus I notwithstanding actually bask the gun overall.

Overall, few critiques but no outright complaints on aesthetics.

Final thoughts

My final idea on the PSA AR9 is that you really tin't complain about this AR-9.

The one thing I actually similar most it is you can buy it complete, ready to go out of the box, comes with a mag, and an SB Tactical Brace.

The only thing you have to do is throw on your optic, add your ammo, and head to the range.

At that place's something to be said about not having to build this matter yourself.

You know, PSA is known for value-built firearms. They might go dinged a picayune bit here and at that place on the QC, just overall you lot can't beat the dollar-for-dollar value that you're going to get out of this gun.

In fact, I've already recommended to a friend of mine to buy this gun and he'due south already bought it, loves it, and has already kitted out, and has taken to the range and had a blast.

PSA AR9

· Quotient: 9mm
· Various Lengths and Configs
· CZ Magazine and Glock Magazine

If you're looking for a PCC on a budget, PSA puts these guns on auction all the time.

They often have blems. They are an even better value.

This gun is perfect for our agency bag, and it just screams fun on the range. Information technology is so much fun.

And then my conclusion is if yous want a PCC and y'all're in the marketplace, go to PSA at the link below and pick one of these up.

You won't regret it and you will end up with a phenomenal firearm.

If y'all are looking for a more traditional style of pistol take a expect at another PSA offering the PSA Dagger.

doddstheationd.blogspot.com

Source: https://lynxdefense.com/reviews/psa-ar9/

Share this post